MACHINE TOOLS  

BAND SAWS: VERTICAL

• Armstrong-Blum, 18" x 18"
• Tanewitcz, 18" x 6" Die saw
• Rockwell, 12" x 6"

BAND SAWS: HORIZONTAL

• Hyd-Mech, S-25 w/Auto cycle hydraulic feed
  • Capacity: Rounds:18″
  • Rectangular or structural shapes: 18" x 27"
  • Miter cut to 60 deg., 10 hp Blade Drive

CUTOFF SAWS:

• Marathon Cold Saws, 10" dia. blade (1)

HYDRAULIC PRESS:

• 30 Ton Vertical, 14" travel

PORTABLE MILLING:

• Master PTM4-VH-40 3HP 24"X 6"Y 10"Z alternate slide 86"
• Enco 115-1100 1HP 3/4" Cap. 18"X 8"Y 6"Z

AUXILLARY EQUIPMENT:

• 9" x 14" Diameter Barrel Tumbler

BAR AND PIPE THREADING:

• Rigid #300 cap. to 6" Pipe (2) Bar threading

FABRICATION TOOLS 

WATER-JET CUTTING STATIONS:

• 2-Axis Omax 4' x 8' Cutting Envelope
• 3-Axis Flow w/dynamic cutting and contour follower, 6' x 12' Cutting Envelope

PLATE AND SHEET FORMING:

• Press Brake - Wysong FAB60-180 x 12' + 24" horn.
  • Capacity 1/4 x 10' to 3/16" x 12' Mild steel maximum.
  • Acute angle, hemming, box dies to 3/16".
• Press Brake - Cincinnati 300H x 12'
  • Capacity 1/2" x 8' to 3/8 x 12' Mild steel maximum.
  • Acute angle, hemming, box dies to 3/16", urethane forming die.
• Press Brake – Di-Arco 16 X 96, Capacity 1/4" x 8'
• Cincinnati Model 4310 Mechanical Squaring Shear,
  • Mild Steel: 1/2" thick x 10'0" long
  • Stainless Steel: 3/8" thick x 10'0" long
• Rolls-Montgomery RS10-11, 1/2" HR Plt x 10'0" length to 18" dia. min. (3) 11" dia rolls
• Rolls (Peck, Stowe & Wilcox 418F) 16 gauge x 48" length.
• Rolls (Peck, Stowe & Wilcox 382D) 22 gauge x 30" length.

WELDING:

• 450 Ampere Miller Pipe Pro RMD/ProPulse TIG / GMAW / GMAW-P / GMAW-S (modified)
• 450 Ampere Miller Axcess RMD and ProPulse CVDC GMAW
• 450 Ampere Miller Deltaweld 451 CVDC GMAW
• 450 Ampere Miller MP-450E CVDC GMAW
• 300 Ampere Miller Synchrowave ACDC SMAW GTAW
• 300 Ampere Miller 300A/BP ACDC SMAW GTAW
• 300 Ampere PowCon Inverter CVDC SMAW GMAW
• 300 Ampere Miller Trailblazer 44D Portable Diesel AC\DCSMAW GTAW w\Remote High Frequency and WaterCooler.
• 250 Ampere Miller Dialarc HF ACDC SMAW GTAW
• 250 Ampere Miller Dialarc HF-P ACDC SMAW GTAW
• (2) 250 Ampere Miller Trailblazer 250G Portable Gas AC\DC SMAW SMAW GTAW GMAW w/ Remote GMAW wire feeders
• 225 Ampere Miller Thunderbolt CCAC SMAW
• (4) 200 Ampere Miller MM-200 CVDC GMAW
• (3) 250 Ampere Miller MM-250 CVDC GMAW
• 200 Ampere Miller CP-200 CVDC GMAW
• 90 Ampere Miller Sidekick CVDC SMAW

SPOT WELDING:

• Taylor/Winfield 50 KVA 13.5" throat x 4" Gap.

TUBE AND BAR FORMING:

• Wrap Bender, PINES #2 SERIES 112 ι3" x 0.109 wall round tubing , 2" pipe, ∼2-1/2" square tubing 12" max radius x 180 deg bend.
• Ram Type Bender, capacity 1" dia. x 11 ga. TW Tubing 90 deg. bend
• One Shot Bender (Enerpac B-340) 1-1/4" to 4" tooling for 3/4" - 2" hydraulic tubing.
• Hossfeld Bender #2 - Angles to 2 x 2 x 3/16, Flats to 1/2 x 4 1/2, Bar to 1 1/4 round or square, Pipe & conduit to 2"

OXY-FUEL CUTTING:

• Koike PLP 2000 with KAR CNC X Control2 Flame Torches, 6' x 12', 8" Max thickness, up to 400 ipmcutting speed.

PLASMA CUTTING:

• Plasma Cutting Machine, 100 Amp Hypertherm PowerMax 1650 G-3, 3/4" Steel, 1" Aluminum, 3/4" Stainless
• Plasma – Thermal Dynamics, Cutmaster 40 Amp 1/2" thk.

THERMAL SPRAY COATING:

• Eutectic/Castolin Model B Torch

PANEL SANDER

• Costruzioni Panel Sander 34" x 112" x 8" 100lb Cap.

WIDE BELT SANDER:

• AEM, Model 137-1HPM 37″ wide

IRON WORKER:

• Geka Hydraulic, 100SD-24 110 Ton, 24" throat with Coping Attachment Punch-1 3/8" dia. thru 7/8" thick PL, 4" Max. dia thru 1/4" Bar Shear-1" Max Thick (16") x 24" Max Width Auto Cycle

ANGLE / BAR / SHAPE ROLLING:

• Buffalo #1, Angle: 3" x 3" x 3/8", Bar 1" x 6", Pipe: 2" Sch 40 pipe 5 BROCH-09 corrected.doc 9/9/2009

PAINTING / CLEANING / BLASTING

• Paint Room * Binks * 14'w x 26'l x 9'h capacity
• Paint Booth 10’w X 10’l X 9’ h capacity
• Ransburg Electrostatic Painting System No 2 gun 100 KV REA IV 60 KV to 95% paint utilization.
• Abrasive Blast Room *Empire* 650 System 15'w x 40' l X 12' h capacity. Environmental systems and automatic media recovery.
• Abrasive Blast Cabinet *Empire* Glass Bead Pressure System 48"'l x 36" w X 30" h capacity

BRIDGE CRANES:

• 10 Ton Bridge Crane for handling heavy material and machine components. 13' under hook, 30' x 160'.
• 7 Ton Bridge Crane
• (2) 5 Ton Bridge Cranes
• (3) 1 Ton Monorail Trolley or Jib Hoist

CAPACITIES

SHEAR: 1/2" X 10' X Mild Steel Plate

BRAKE:

• 8' x 1/2" Mild Steel Plate
• 12' x 3/16" Mild Steel Plate

ROLL:

• 1/2" x 10'-0" Mild Steel Plate 18" dia.
• 30" x 22 Ga. Mild Steel Sheet
• 3 x 3 x 3/8 Angle
• 1" x 6" Flat Bar
• 2" dia Pipe

PUNCH: 1-3/8" dia. thru 7/8 Mild Steel Plate

PIPE CUT & THREAD: 24" dia. pipe x 240" long

WELDING: SMAW, GTAW, GMAW to 350 AMPS

AC/DC PULSED ARC RMD, ProPulse

PORTABLE: SMAW, GTAW to 300amps

GMAW (to 250 amps) Steel, alloys, stainless steel, cast iron, aluminum, magnesium and other non ferrous metals.

PLASMA: Cut 3/4" Steel, 1″Aluminum, 3/4″ Stainless Steel

MILLING:

• 48"w x 48"l x 60"h 5,500 lb.
• 48"w x 100"l x 36"h 8,000 lb.

LATHE TURNING: 49-1/2" swing, 240" centers.

PLANING: 62"w x 192"l x 36"h 10,000 lb.

GRINDING:

• 47" swing x 21"h Rotary surface.
• 10"w x 24"l x 12"h Reciprocating surface.

 TRANSPORTATION, FREIGHT, PICK-UP & DELIVERY 

TRUCKS:

• STRAIGHT BOX TRUCK 26,000 lb. MAX25’ X 8’ X 8’ CUBE CAPACITY
• 1 Ton Crew Cab Service Vehicle
• 2) 3/4 Ton PICKUPS

TRAILERS:

• TRACTOR TRAILER: 30' FLAT, 20' BOX, 40' BOX 25,000 lb. MAX.
• LOWBOY TRAILER: 16' 10,000 lb. MAX.

AIRCRAFT:

• Piper Navajo Chieftain
  8-passenger or 1500 lb cargo.

INSPECTION

 COORDINATE MEASURING MACHINE:

• Sheffield Cordax 3000Work area / travel (X/Y/Z): 30" x 20" x 16 OPTICAL COMPARATOR:
• Nikon 3A