Fabritek Co. Inc.
Fabrication Tools

PLATE AND SHEET FORMING:

• Press Brake - Cincinnati 300H x 12'
• Capacity 1/2" x 8' to 3/8 x 12' Mild steel maximum
• Acute angle, hemming, box dies to 3/16", urethane
• forming die
• Cincinnati Model 4310 Mechanical Squaring Shear
• Mild Steel: 1/2" thick x 10'0" long
• Stainless Steel:  3/8" thick x 10'0" long
• Rolls-Montgomery RS10-11,  1/2" HR Plt x 10'0" length
• to 18" dia. min.  (3) 11" dia rolls, cone attachment
• Rolls (Peck, Stowe & Wilcox 418F) 16 gauge x 48" length
• Rolls (Peck, Stowe & Wilcox 382D) 22 gauge x 30" length
• Apron Brake - Whitney Metal Tool Co., 16 gauge x 67" length

IRON WORKER:

• Geka Hydraulic, 100SD-24 110 Ton, 24" throat with Coping Attachment
• Punch-1 3/8" dia. thru 7/8" thick PL, 4" Max. dia thru 1/4"
• Bar Shear-1" Max Thick (16") x  24" Max Width (5/8") Auto Cycle

ANGLE / BAR / SHAPE ROLLING:

• Buffalo #1, Angle: 3" x 3" x 3/8", Bar 1" x 6"
• Pipe: 2" Sch 40 pipe

TUBE AND BAR FORMING:

• Wrap Bender, PINES #2 SERIES 112  Æ3" x 0.109 wall
• round tubing , 2" pipe,  o2-1/2" square tubing
• 12" max radius x 180 deg bend
• Wrap Bender, capacity 2" x 16 ga.
• TW Tubing 120 deg. bend
• Ram Type Bender, capacity 1" dia. x 11 ga.
• TW Tubing 90 deg. bend
• One Shot Bender (Enerpac B-340) 1-1/4" to 4"
• tooling for 3/4" - 2" hydraulic tubing
• Hossfeld Bender #2 - Angles to 2 x 2 x 3/16, Flats to
• 1/2 x 4 1/2, Bar to 1 1/4 round or square,Pipe & conduit to 2"
• Flaring tool for hydraulic tubing.

WELDING:

• 450 Ampere Miller Deltaweld 451 CVDC GMAW
• 450 Ampere Miller MP-450E CVDC GMAW
• 300 Ampere Miller Synchrowave ACDC SMAW GTAW
• 300 Ampere Miller 300A/BP ACDC SMAW GTAW
• 300 Ampere PowCon Inverter CVDC SMAW GMAW
• 300 Ampere Miller Trailblazer 44D Portable Diesel ACDC
• SMAW  GTAW w\Remote High Frequency and Water Cooler
• 250 Ampere Miller Dialarc HF ACDC SMAW GTAW
• 250 Ampere Miller Dialarc HF-P ACDC SMAW GTAW
• (2) 250 Ampere Miller Trailblazer 250G Portable Gas
• ACDC SMAW  SMAW GTAW GMAW w/ Remote GMAW wire feeders
• 225 Ampere Miller Thunderbolt  CCAC SMAW
• (4) 200 Ampere Miller MM-200  CVDC GMAW
• (3) 250 Ampere Miller MM-250  CVDC GMAW
• 200 Ampere Miller CP-200 CVDC GMAW
• 90  Ampere Miller Sidekick  CVDC SMAW

SPOT WELDING:

• Taylor/Winfield 50 KVA 13.5" throat x 4" Gap

OXY-FUEL CUTTING:

• Koike IK-1200J Flame Shape Cutting Machine, 2 torches
• 4' x 8' Tracing, 4' x 10' max. Cutting Travel
• 8" Max Thickness. 4-120ipm cutting speed. Plasma 100amp

THERMAL SPRAY COATING:

• Eutectic/Castolin Model B Torch

PLASMA CUTTING:

• Plasma Cutting Machine, 100 Amp Hypertherm
• Portable and/or Machine, Electric Eye Tracing
• 1-1/4" Steel, 1" Aluminum, 1" Stainless Steel
• Plasma - Miller Zipcut, 40 Amp 3/8" Capacity

PANEL SANDER

• Costruzioni Panel Sander 34" x 112" x 8" 100lb Cap.

PAINTING / CLEANING / BLASTING

• Paint Room * Binks * 14'w x 26'l x 9'h capacity
• Ransburg Electrostatic Painting System No 2 gun 100 KV
• REA IV 60 KV to 95% paint utilization.
• Abrasive Blast Room *Empire* 650 System
• 15'w x 40' l X 12' h  Capacity
• Environmental systems and automatic media recovery.

BRIDGE CRANES:

• 10 Ton Bridge Crane for handling heavy material and
  
• machine components. 13' under hook, 30' x 160'
• (1) 7 Ton Bridge Crane
• (2) 5 Ton Bridge Cranes
• (3) 1 Ton Monorail Trolley or Jib  Hoist